|
 |
Spiral wound gasket production process and equipment
 In
the present seal, metal spiral wound gasket with
excellent elasticity, high temperature, high
pressure, low temperature and other characteristics,
has become a very wide range of applied seal.
Especially suitable for uneven loading, relaxation
and easy access together, cyclical changes in
temperature and pressure of the occasion, is the
main flange gasket. In the petrochemical pipelines,
mechanical seals, shipbuilding, metallurgy,
aerospace and other industries widely.
It
is due to the importance of
Spiral Wound Gaskets, so its quality is good or bad for the sealing device has a
great impact. If the gasket to poor quality, or even
cause damage to the sealing device and operator
hazards. Now domestic manufacturers of spiral wound
gaskets generally poorly equipped, poor technology,
spiral wound gasket relatively low level of
production, the quality produced by the spiral wound
gasket is not stable enough. In addition to
equipment problems, as well as the structural
parameters of spiral wound gasket is no uniform
process parameters of research and analysis, most
manufacturers are based on their experience to
production, such as wrapping and packing with a flat
strip width, strip forming the angle and width of no
uniform requirements, these details of the problem
is the appearance of spiral wound gaskets and
quality reasons. In addition, the production of
spiral wound gasket is not high degree of
automation, manual operation is not only
inefficient, difficult to guarantee quality gaskets,
such as in the winding process, the pad width size,
strip tension force and shear force were not
automatically control, size, manual measurement,
these factors seriously affected the gasket. With
the rapid development of industry and the increasing
requirements on the parameters of the increasing
demand for high-quality spiral wound gasket, spiral
wound gaskets of process parameters and equipment,
it has very important significance.
Based on this, I optimized the optimum gasket and structural
parameters, to develop the best technical standards,
development and production of a special gasket CNC
equipment, including cutting machine, winding
machine, bending machine, Central , ring milling
machine. Gasket in the core function of the process
is winding, winding machine of our company high
degree of automation, feed, size, strip tension
force can be a dedicated controller through my
company automatic control and display, large size
can be Automatic welding and non-punch wound,
production efficiency is greatly improved, while the
production of high quality out of pads, in line with
various standards, will be the future trend of the
production of
Spiral Wound Gasket. At the same time as the market demand, the company will
also upgrade equipment, such as automatic ejection.
Customer needs is our driving force, welcomed the new and old
customers to negotiate inquiry.>>The
End
|
